Product ID:AEROSHELL GREASE 22;SHELL CODE:70022
MSDS Date:11/03/1988
FSC:9150
NIIN:00-181-7724
MSDS Number: BDGMJ

SHELL OIL COMPANY

HEALTH, SAFETY AND ENVIRONMENT
HOUSTON, TX 77210
US

Emergency Phone: 713-473-9461

Info Phone: 713-241-4819

Preparer: J.C.WILLET

Cage: 54527

SHELL OIL COMPANY

29366 HOUSTON, TX 77210 US

Telephone: 800-231-6950

Cage: 54527

POLYALPHAOLEFINS

CAS: 68037-01-4

Fraction By Weight: 86.06%

BENTONITE (AS NUISANCE DUST OR PARTICULATES NOT OTHERWISE

CAS: 1302-78-9

RTECS: CT9450000

Fraction By Weight: 6.0%

OSHA PEL 15 MG/M3 TOTAL DUST

ACGIH TLV: 10 MG/M3 TDUST;8990

FATTY ACID AMIDES

CAS: 64754-98-9

Fraction By Weight: 4.0%

OTHER COMPONENTS

Fraction By Weight: 4.0%

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYE:MAY BE MILDLY IRRI.SKN
CNTCT:PRLNG/RPEAT CNTCT MAY CAUS VARIOUS SKN DSORDRS SUCH AS
DERMATITIS,FOLLICULTS/OIL ACNE.RLEAS DURNG HGH PRESSURE USAGE MAY
RSULT IN INJECTN OF OIL INTO SKN CAUS LOCAL NE CROSIS.INHAL &
INGES:NO SPEC INFO IDENTFD.
Explanation of Carcinogenicity:DATA PER MSDS
Effects of Overexposure:IRRI AS NOTED IN HEALTH HAZARD DATA. LOCAL
NECROSIS IS EVIDENCED BY DELAYED ONSET OF PAIN & TISSUE DAMAGE A
FEW HOURS FOLLOWING INJESTION.
Medical Cond Aggravated by Exposure:PERSONS WITH A HISTORY OF AILMENTS
OR WITH A PRE-EXISTING DISEASE INVOLVING THE EYES, SKIN, OR
RESPIRATORY TRACT MAY BE AT INCREASED RISK FROM EXPOSURE.

First Aid:INHALATION:REMOVE TO FRESH AIR. RESUSCITATE IF NOT BREATHING.
GET MEDICAL ATTENTION. EYES:IMMEDIATELY FLUSH WITH PLENTY OF WATER
FOR 15 MINUTES HOLDING EYELIDS OPEN. GET MEDICAL ATTENTION.
SKIN:REMOVE CONTAMINATED CLOTHING. WASH WITH SOAP AND WATER. IF
IRRITATION PERSISTS, GET MEDICAL ADVICE. INGESTION:DO NOT INDUCE
VOMITING. GIVE NOTHING BY MOUTH IF UNCONSCIOUS. GET IMMEDIATE
MEDICAL ATTENTION.

Flash Point Method:PMCC
Flash Point:455F/235C
Lower Limits:N/AVAILABLE
Upper Limits:N/AVAILABLE
Extinguishing Media:USE WTR FOG,DRY CHEM/CO*2.DO NOT USE A DIRECT
STREAM OF WTR.PRODUCT WILL FLOAT & CAN BE REIGNITED ON SURFACE OF
WATER.
Fire Fighting Procedures:FIRE FIGHTERS SHOULD USE NIOSH APPROVED SCBA &
FULL PROTECTIVE EQUIPMENT WHEN FIGHTING CHEMICAL FIRE. USE WATER
SPRAY TO COOL NEARBY CONTAINERS EXPOSED TO FIRE.
Unusual Fire/Explosion Hazard:FIRE OR EXCESSIVE HEAT MAY CAUSE
PRODUCTION OF HAZARDOUS DECOMPOSITION PRODUCTS.

Spill Release Procedures:USE PROPER PERSONAL PROTECTION;SCOOP UP AND
CONTAIN FREE MATERIAL IF POSSIBLE;USE SUITABLE INERT ABSORBENT
MATERIAL AND RECOVER FOR PROPER DISPOSAL IN AN APPROVED CONTAINER.
Neutralizing Agent:NOT APPLICABLE.

Handling and Storage Precautions:STORE IN A COOL, DRY, WELL VENTILATED
AREA. KEEP CONTAINERS TIGHTLY CLOSED WHEN NOT IN USE. PROTECT
CONTAINERS FROM PHYSICAL DAMAGE.
Other Precautions:DO NOT TAKE INTERNALLY. DO NOT BREATHE MIST. AVOID
PROLONGED OR REPEATED BREATHING OF VAPOR. AVOID CONTACT WITH EYES.
USE WITH ADEQUATE VENTILATION. WASH THOROUGHLY AFTER HANDLING.

Respiratory Protection:NOT NORMALLY NEEDED;USE NIOSH/MSHA APPROVED
RESPIRATOR AS REQUIRED IF ABOVE PEL/TLV OR SCBA IN AN ENCLOSED
AREA.
Ventilation:NORMAL ROOM VENTILATION;LOCAL/GENERAL TO MAINTAIN PEL/TLV.
Protective Gloves:NEOPRENE, NITRILE, OR NATURAL RUBBER
Eye Protection:SAFETY GOGGLES WITH OPTIONAL FACE SHIELD
Other Protective Equipment:EYE WASH STATION, WORK CLOTHING AND APRON AS
REQUIRED.
Work Hygienic Practices:OBSERVE GOOD PERSONAL HYGIENE PRACTICES AND
RECOMMENDED PROCEDURES. DO NOT WEAR CONTAMINATED CLOTHING OR
FOOTWEAR.
Supplemental Safety and Health
AVOID PROLONGED OR REPEATED EXPOSURE. DO NOT GET ON SKIN OR IN EYES. DO
NOT BREATHE VAPORS OR MISTS.

HCC:V6
Melt/Freeze Pt:M.P/F.P Text:N/AVAILABLE
Decomp Temp:Decomp Text:N/K
Vapor Pres:N/AVAILABL
Vapor Density:N/AVAILABL
Spec Gravity:N/AVAILABLE
pH:N/K-FP
Evaporation Rate & Reference:N/AVAILABLE
Solubility in Water:INSOLUBLE
Appearance and Odor:SMOOTH AMBER GREASE.SLIGHT ODOR.
Percent Volatiles by Volume:N/K-FP
Corrosion Rate:

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:HIGH TEMPERATURES, SPARKS, AND OPEN FLAMES
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE AND
OTHER UNIDENTIFIED COMPONENTS.
Conditions to Avoid Polymerization:AVOID HEAT & OPEN FLAME.

Waste Disposal Methods:CONSULT LOCAL AUTHORITIES.DISPOSAL MUST BE MADE
IN ACCORDANCE WITH ALL APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.